What is Show-me Magix?
Show-me Magix, Steps 3&4 of the Show-me Cleaning System, is a Whiteboard Cleaner & Conditioner that is specifically designed for those stubborn stains, wrong inks, ghosting and graffiti, to name a few common scenarios. With the added benefit that, when applied to a new or clean whiteboard surface, it conditions (leaves a microfilm layer) on the surface that improves erasability and gives a smoother writing experience.
Now you know what Show-me Magix is, it’s best to include what it is not.
Show-me Magix is not the right solution for everyday cleaning. Not only is this wasteful, it is a much more costly way to clean your boards!. A specially formulated whiteboard cleaner, such as the Show-me Step 2 Refillable Whiteboard Cleaner is a much better and cost effective solution for regular cleaning.
Are all boards suitable for Show-me Magix?
The short answer is, yes. Show-me Magix is a powerful alcohol-based whiteboard cleaner that cuts through permanent markers, stubborn staining, and ghosting to name a few. Even with this power, the solution is still suitable for all types of mini-whiteboards and wall-mounted whiteboards. Just remember to work in a well-ventilated room or only use in short bursts.
Is it suitable for other surfaces?
Yes, It has been used for outdoor activity boards, such as playground pictures. These are typically foam-based boards with a design used in the school playground with drywipe markers. In some scenarios Show-me Magix is used to remove graffiti from table tops, notice boards and windows. You’ll need to check if the surface is non-porous first. For example; bare brick walls are porous, which means that the liquid gets sucked into the surface and does not have time to clean the surface effectively which is not what you are after. Conversely non-porous surface allow the cleaner to sit on the surface long enough to clean the marks off.
Remember that alcohol based cleaners, such as Show-me Magix evaporate when left.
Should I use Show-me Magix first?
This depends on the known circumstances. For example, if you accidentally picked up a permanent marker and used it on a whiteboard, then you are best to use Magix. You already know that a drywipe eraser or water-based whiteboard cleaner is not going to remove the marks.
If you come across a whiteboard and try to remove the marks, it is very possible that the ink has baked on. This requires a proper cleaner. Always try using a drywipe eraser and a water-based whiteboard cleaner before using Magix.
So, how do you use Show-me Magix?
Spray and wipe, as easy as that. However the way in which you do this does make a difference.
It’s best to work on a section at a time to prevent the formula from drying out. Work your way from the top, to the bottom of the board. Throughout this process, you will need to fold or rotate your cloth. This is to ensure that rewetted ink is not transferred back to the board surface.
One of the most common mistakes we hear about? Spraying the whole surface of a large wall-mounted whiteboard, then wiping the marks. Not only does this waste a huge amount of ‘liquid gold’, but it doesn’t clean the board.
When you spray the whole board before wiping, you rewet the ink allowing it to drip down the board surface, this will loosen up the marks but if the cleaner has evaporated the ink will dry again meaning that more cleaning is required.
What are the alternatives to Show-me Magix?
There are thousands of ‘helpful’ articles out there. They can include abrasive cleaners, toothpaste, or even making your own cleaner to remove permanent marker from whiteboards. However, these can destroy the surface of your board or leave tiny abrasions. All resulting in your own cleaner being hazardous to your health.
There are other permanent marker cleaners and whiteboard conditioners on the market. But none that we have tried perform the same as Show-me Magix Whiteboard Cleaner & Conditioner. Why look any further when the solution is here?
Remember to always use erasers, cleaners and conditioners that have been designed specifically for whiteboard use, if in doubt let us know.
Blog refreshed on 09/06/2025.